Bottle and Closure Test Conditions
Keep the elapsed time, storage condition and test procedure consistent within the agreed routine sampling method.
Filling and packaging systems
Routine Production Using Closure Torque Measurement
Plan routine closure torque checks around the bottle and cap references, measurement event, conditioning interval, sampling method and result records your team needs.
In brief
For routine checks, identify the bottles and caps, define the measurement event and confirm sample conditioning, fixture access and result records before comparing equipment.
For routine checks, agree which packs are sampled, when they are tested and how each result is linked to its production batch.
On the production floor
Plan for the conditions your team handles every day — Closure Torque Measurement
Use the torque-test specification checklist to prepare the bottle and cap references, test event, conditioning interval, units and batch-linked result records.
Discuss your application
Your application
Details worth resolving early for routine production using closure torque measurement
Bottle and Closure Formats
Identify the bottle and cap references used for each production sample.
Measurement Event, Range and Units
Confirm the required measurement event, range and units against the approved pack decision limits.
Sampling and Result Records
Agree which packs are sampled and link each reading to the line, closure batch, product and time.
Fixture Access and Format Changes
Record fixture settings and cap access so operators use the same restraint and turning method.
Result Review and Exception Handling
Identify disturbed test packs, retain unexpected readings and document any retest or production action.
Your operating cycle
Plan the Complete Sampling and Test Routine
Allow for sample selection and conditioning, fixture setup, measurement, recording and exception review. Ask which parts of the procedure change with the bottle or cap format.
- Routine samples and format changes
- Sample identity and conditioning
- Operator access and safe interventions
- Fixture care and exception review
Prove the result
Test routine production using closure torque measurement against representative products, packs and difficult production conditions
Normal production
Use the agreed bottle and cap samples, conditioning interval and procedure. Record the instrument, unit, operator and each reading.
Difficult conditions
Include credible extremes for bottle and closure test conditions and bottle and closure formats.
Fault and recovery
Review an unexpected reading without losing the original result. Record any retest reason, responsible reviewer and the agreed action for the affected sample.
Important limits
Be clear about what the trial has shown
- The selected method must be trialled with representative product and packaging.
- Supplier tolerances and product-condition changes can alter grip or opening behaviour.
- Equipment selection does not replace product, hygiene, packaging or regulatory validation.
Compare with Short Runs and Format Changes Involving Closure Torque Measurement if that operating pattern is closer to your application.